Saudi Supplier of Industrial Cutting Tools & CNC Machining Solutions · Al Khobar

Precision Industrial Tooling & CNC Machining Solutions for Saudi Manufacturing.

Illustrative 3D model

TANOVA is a premier Saudi supplier of industrial cutting tools, CNC machining solutions, and precision tooling systems. From engineering tool selection and technical application support to competitive quotations and rapid delivery, we support manufacturing plants across the Kingdom with cutting-edge milling, turning, drilling, boring, and deburring solutions.

Scroll to take the tool apart
Authorized Distributor for Motherson Techno Tools FZE • Global Tooling Supplier Network
Al Khobar –:–:– AST

02 / Authorization & Partner Network

Established in 2026 in Al Khuzama, Al Khobar, TANOVA is a Saudi supplier of industrial cutting tools and CNC machining solutions—serving as the authorized distributor for Motherson Techno Tools FZE in alignment with Saudi Vision 2030.

Guided by our core values of Partnership, Precision, and Service, we combine direct factory representation with on-site application engineering across Saudi Arabia’s Oil & Gas, Energy, Automotive, Aerospace, Valves & Pumps, and General Engineering sectors—delivering Sumitomo Electric Hardmetal, DELTACARB Switzerland, BIG DAISHOWA, HEULE Precision Tools, and YAMAWA.

DIRECT FACTORY REPRESENTATION
AUTHORIZED PRINCIPALS
Authorized Distributor & Principal

Motherson Techno Tools FZE

Carbide, cermet, CBN & PCD indexable inserts, high-feed milling assemblies, and turnkey engineering packages for Saudi industrial machining plants.

JAPAN
Distribution Partner
Sumitomo Electric Hardmetal

CVD/PVD coated turning grades & CBN solutions.

SWISS
Distribution Partner
DELTACARB Switzerland

Solid carbide rods, micro-drills & wear blanks.

JAPAN
Holding Principal
BIG DAISHOWA

Dual-contact BBT toolholders & precision boring.

SWISS
Technology Partner
HEULE Precision Tools

Automated front & back bore deburring in 1 pass.

JAPAN
Threading Partner
YAMAWA

High-precision industrial threading taps, dies & thread-mills for oilfield valves and aerospace alloys.

03 / Anatomy of a face mill

Illustrative 3D model

One body, six inserts. A face mill is a steel body that carries replaceable cutting inserts.

Inserts are indexable. On Garud cutters the LNMX and SDMT inserts have four corners; the double-sided WNMX has six.

Curved cutting edge. The Garud edge geometry is made for smooth high-feed cutting, with lower impact forces and higher stability.

Back together. Feed up to 2.0 mm/tooth; grade DMP2130P handles steels up to 50 HRC. See the Garud series →

04 / Specifications

The numbers, with the product line they belong to.

IT9
Hole accuracy
BTA deep-hole drills
Ra 3.2
Hole roughness
BTA deep-hole drills
2.0 mm/tooth
Feed rate, up to
Garud high-feed milling
50 HRC
Hardness of steel machined, up to
Garud, grade DMP2130P

Performance figures reflect verified manufacturer test conditions across ISO P/M/K materials; optimal speeds, feeds, and tool life depend on specific workpiece alloy, machine rigidity, and setup parameters.

05 / Operations

Five jobs, one technical desk.

01 · BTA and Gundrill series

Deep-hole drilling

BTA drills are made for deep, large-diameter holes where accuracy, straightness and surface finish matter. Chip evacuation and coolant delivery are part of the design.

BTA Ø15.6 to 50.1 mm
IT9
Ra 3.2
Gundrills Ø0.9 to 12 mm

Typical parts: hydraulic cylinders, valve bodies, pump and motor housings, oil and gas components.

02 · MXD series

Indexable drilling

Indexable drilling with custom forms for plunge, counterbore, chamfer and combination holes.

D2 to D5 body options
Four-corner MDXT inserts

03 · Garud and MXSM series

Milling

Garud curved cutting edges give smoother high-feed cutting with lower impact forces. MXSM is a true 90° shoulder cutter with six-cutting-edge inserts.

Up to 2.0 mm/tooth
Grade DMP2130P: steels up to 50 HRC
Grades DMP2030P, DMP2130P
MXSM depth of cut up to 7 mm

04 · DTC3000K series

Turning cast iron

CVD-coated turning grades for grey and ductile cast iron. DTC3005K for finishing and general machining under stable conditions; DTC3015K for general machining, interrupted cuts included.

Grey and ductile cast iron
Multilayer TiCN-Al
2
O
3
CVD coating
DTC3005K, DTC3015K

05 · Honing abrasives

Bore finishing

Vitrified and metalbond honing stones for finishing bores, in silicon carbide, aluminium oxide, diamond and CBN, for all major brands of honing machines.

Vitrified
Metalbond
Ohio Tool Works range

Illustrative 3D models

06 / Method

How an enquiry becomes a trial.

Five steps from your first message to follow-up, run from the Al Khobar desk.

01

Define

You tell us the part, the material, the machine and the problem.

02

Review

We go through your drawing and your current tooling.

03

Recommend

We propose a tool and grade from the partner range.

04

Evaluate

A demonstration or trial shows how the tool performs on your part.

05

Follow through

We stay with the result after the trial.

07 / Featured industrial tooling

Tooling we stock for Saudi industry.

High-feed face mills, indexable drills, hard-turning grades and dual-contact toolholders from our authorized principals. The latest additions to the catalogue, ready to inspect, quote and ship from Al Khobar.

Latest additions
BTA Deep-Hole Drilling System (STS)
TAN-DRILL-BTA

BTA Deep-Hole Drilling System (STS)

Industrial deep-hole boring system for boreholes 15.6–50.1 mm delivering IT9 tolerance and Ra 3.2 µm finish.
OTW Superabrasive Honing Stones & Abrasives
TAN-HONE-OTW

OTW Superabrasive Honing Stones & Abrasives

Conventional silicon carbide/aluminium oxide and vitrified/metalbond diamond & CBN honing stones from Ohio Tool Works for precision bore finishing.
HEULE Automated Cross-Hole Deburring Solutions
TAN-DEBURR-HEULE

HEULE Automated Cross-Hole Deburring Solutions

Swiss-engineered automated front-and-back bore deburring, chamfering, and back-spotfacing tools completing both edges in a single spindle pass.
BIG DAISHOWA Precision BBT Tool Holding Systems
TAN-HOLD-BIGDAI

BIG DAISHOWA Precision BBT Tool Holding Systems

Japanese simultaneous dual-contact (BIG-PLUS BBT) toolholders, collet chucks, and digital/modular fine boring heads with runout < 1 µm.
KAVACH Extreme Temperature Protective Coating Series
TAN-HARD-KAVACH

KAVACH CBN Surface Engineering Coating

Advanced multi-layer CBN surface technology engineered to fuse with the substrate for extreme hardness, edge toughness, and anti-delamination.
Cermet High-Speed Finishing Inserts
TAN-HARD-CERMET

Deltacarb Cermet Turning Grades (DT1015U / C / DT1025C / DT1035C)

Four dedicated ISO P Cermet grades (DT1015U uncoated, DT1015C, DT1025C, DT1035C PVD) for high-finish steel turning in wet and dry cuts.
MUB3020K Micro-Grain Hardmetal Grade
TAN-HARD-MUB3020K

MUB3020K Uncoated High-CBN Grade (ISO K20)

Next-generation uncoated High-CBN grade with advanced metallic binder exclusively engineered for high-speed grey & alloy cast iron.
MCB7005H & MCB7030H CBN Hard-Part Turning Inserts
TAN-CBN-MCB7000

MCB7005H & MCB7030H Coated CBN Hard-Part Turning Inserts

KAVACH-coated CBN grades covering both continuous high-speed finishing (MCB7005H, ISO H05) and heavily interrupted hard turning (MCB7030H, ISO H30).
E1-Soft Tools Lathe Holders & Boring Bars
TAN-HOLD-E1LATHE

E1-Soft Tools Lathe Holders & Boring Bars

Complete ISO external lathe toolholders and internal coolant-through steel boring bars across C, D, S, T, V, and W insert geometries.
Shallow Grooving & Circlip Turning System
TAN-GROOVE-SHALLOW

Shallow Grooving & Circlip Turning System

High-precision shallow grooving inserts ground to tight tolerances for O-ring seats, circlip retaining grooves, and precision snap rings.

Looking for something specific?

Filter the complete catalogue by operation, ISO workpiece material or principal, then inspect specifications and request a quote.

08 / Leadership

Our Leadership Team

Nawaf Aldabbagh
Managing Director
Thamer Alsagheer
Project Management & Business Development Director
Ammar AlBarashi
Operations Director

TANOVA Regional Headquarters, Al Khuzama, Al Khobar, Eastern Province, Kingdom of Saudi Arabia · Est. 2026.

Aligned with Saudi Vision 2030 & Local Industrial Excellence

Vision: To become the leading partner for high-precision industrial cutting tools in Saudi Arabia and the GCC, driving technological innovation and sustainable industrial growth.
Mission: Supplying innovative cutting tools backed by engineering excellence and dedicated support—maximizing performance, quality, and efficiency.
Values: Partnership, Precision, Service.

Industries Served: Oil & Gas · Energy · Automotive · Aerospace · Valves & Pumps · General Engineering & Maintenance.
Why TANOVA: Trusted Global Brands · Technical Expertise · Application Engineering · Reliable Delivery · Dedicated Support.

Kingdom of Saudi Arabia Vision 2030
Saudi Vision 2030 Alignment

09 / Request a quote

Send us the part, the material and the machine.

Access our dedicated Request for Quotation portal to review selected tooling, specify required quantities, attach 2D/3D component drawings, and receive formal engineering specifications from our Al Khobar technical desk.